Language:
Litostroj Group / Litostroj Steel
Litostroj Steel Ltd.
Litostroj Steel Ltd.

LITOSTROJ STEEL LTD., Production of Quality Steel Castings,

Litostrojska cesta 44, P.O. BOX 296
1000 Ljubljana, Slovenia

T: +386 1 513 12 00
F: +386 1 505 66 96
E: foundry@litostroj.com

VAT ID: SI77632524
Registry number: 2235374
DOWNLOAD

Typical steel grades produced by Litostroj

Own and permanent supplier machine tools

Material testing
C Si Mn P S Cr Mo Ni Cu V Ti Al W Co Nb Sn As Sb Mg N2
0,005–4% do 4% do 15% do 1% 0,001–0,4% do 30% do 9% do 30% do 6.5% do 2% do 2% do 1% do 15% do 10% do 3% do 0,3% do 0,15% do 0,15% do 0,15% do 0,3%

Litostroj can perform mechanical tests and chemical analysis of materials. In mechanical testing laboratory we make tensile, toughness and hardness tests and microstructure analysis.


This department is equipped with following machines:

- AMSLER universal tensile testing machine (10, 20, 30, 100, 200,300 kN)
- AMSLER universal tensile testing machine (60, 120, 300, 600 kN)
- Charpy device for notch impact tests Toni MFL (0-300 J)
- Hardness tester according to Brinell KARL FRANK
- Hardness tester according to Vickers ZWICK 3212
- Hardness tester according to Rockwell Tesor HT 2001
- Portable hardness tester
- Device for performing bending tests
- Devices for preparation of metallographic specimens Buehler
- Optical microscope LEITZ


Department for chemical analysis is equipped with

- Spectrometer ARL 3560 and ARL 3460,
- LECO apparatus CS 244 for carbon and sulphur,
- LECO apparatus TS 144 for nitrogen.

With those devices we can analyse following chemical elements:






We also analyse some other elements: B, Bi, Ca, Ce, La, Ta, Te, Zn, Zr
Valid XHTML 1.0 Transitional
Valid CSS!

Litostroj Steel Ltd.

Litostroj Steel Ltd.

Litostroj Steel Ltd.
Copyright Litostroj Steel Ltd. 1999 - 2010
Corporate Information | Legal Disclaimer | Contact & Location | Mail us | Site Map